You can create Home and Work network locations on your Mac, give each one its own settings, and switch back to Automatic.
These steps reflect Apple’s current guide for macOS Ventura (macOS 13) or later; older versions are covered below.
If your Mac needs different network settings at home and work, locations can help. Creating one keeps your current setup available. You can do it without an app or Terminal command.
What Are Network Locations?
A network location is a saved set of settings for services such as Wi-Fi and Ethernet. Your Mac starts with a location called Automatic. If it connects at home and work without changes, stick with that.
Named locations help you change a setting for one place while keeping your earlier setup. You might prefer Ethernet before Wi-Fi at work, then Wi-Fi at home. Apple uses this service-order example in its guide to using network locations on Mac.
You choose locations yourself. Your Mac won’t select Work just because you’ve arrived at work.
Prerequisites
- A Mac running macOS Ventura (macOS 13) or later for the System Settings steps below, per Apple’s current support guide. Check your version in Apple menu > About This Mac.
- Access to any network you plan to configure. If work requires specific settings, get the values from your network administrator.
- The name of your current location, so you can return to it. It may be Automatic.
- An Ethernet connection if you want to compare Wi-Fi and Ethernet service order. Depending on your Mac, you’ll need a built-in port, USB-C Ethernet adapter, USB-C hub, or Thunderbolt dock.
You can create and switch locations without Ethernet. The service-order example is optional.
Step-by-Step Guide: How to Create and Switch Network Locations on macOS
These steps apply to macOS Ventura (macOS 13) or later, per Apple’s current support documentation.
Apple’s Mac User Guide describes the Network settings workflow. Apple’s support article calls the pop-up menu below the network services More, while the Mac User Guide calls the same control the Action pop-up menu. Both names refer to one menu; use the label shown on your Mac.
Step 1: Open Network Settings
Choose Apple menu > System Settings. Click Network in the sidebar. Scroll down if you don’t see it.
You’ll see services such as Wi-Fi and, if available, Ethernet. Leave your current connection alone for now.
Expected result: The Network settings pane is open.
Step 2: Open the Location Editor
In Network, click the More or Action menu below the services. Choose Locations > Edit Locations.
Find your current location in the list. It’s often Automatic. Remember its name before you add anything.
Expected result: The Edit Locations dialog shows your locations and the add and remove controls.
Step 3: Create a Home Location
In Edit Locations, click add (+). Enter Home, then click Done.
Your previous location stays available, along with its settings. Apple confirms this in its network locations instructions.
Before changing settings, check that Home is selected in Network. Open More or Action > Locations and select Home if needed.
Expected result: Home appears in the list and can be selected from Locations.
Step 4: Make Home Changes While Home Is Selected
With Home selected, change only what your home network needs. Apple’s Mac User Guide says to enter settings for each network service you want to use in a new location, so check Wi-Fi and Ethernet while Home is selected. If you use both Wi-Fi and Ethernet, you may want a different service order at home. If your settings already work, leave them alone.
When you’re done, leave Network settings or quit System Settings to save the changes and complete the switch.
Apple describes this in its network locations guide for macOS Ventura or later.
Expected result: Home is selected, with any changes you made while using it.
Tip: Check the selected location before editing Wi-Fi, Ethernet, or other network settings. That keeps each change with the setup where you need it.
Step 5: Create a Work Location
Go to Apple menu > System Settings > Network. Open More or Action > Locations > Edit Locations. Click add (+), enter Work, and click Done.
Check More or Action > Locations and select Work if needed. Then make the changes your work network requires. If your employer provides settings, follow those instructions. Don’t guess at an Internet Protocol (IP) address, Domain Name System (DNS) server, or proxy.
Leave Network settings or quit System Settings when you’re done.
Expected result: Home and Work are available, along with your original location.
Step 6: Set a Different Wi-Fi and Ethernet Order, If Needed
Service order controls which available network service your Mac tries first. Apple gives an example: prefer Ethernet in one location and Wi-Fi in another. That can help if you use a cable or Thunderbolt dock at work and Wi-Fi at home. It doesn’t promise a faster connection.
Select Work under System Settings > Network > More or Action > Locations. In that same menu, look for Set Service Order. If it’s available on your macOS version, open it, move Ethernet above Wi-Fi, and confirm. Then select Home and, if you want the reverse order, move Wi-Fi above Ethernet.
The list can show only services available on your Mac. If Ethernet is missing, check that your port or adapter is connected and appears in Network. Service-order controls can vary by macOS version, so follow the labels on your Mac.
Expected result: Each named location has the service order you chose while it was selected.
Step 7: Switch Between Home and Work
Choose Apple menu > Location > Home or Work. Location appears in the Apple menu when your Mac has more than one network location.
You can also use Apple menu > System Settings > Network > More or Action > Locations. Choose a location, then leave Network settings or quit System Settings to complete the change.
Expected result: Your Mac uses the location you chose.
Step 8: Return to Automatic or Your Previous Location
To return to your original setup, choose Apple menu > Location > Automatic. If it had another name, choose that instead.
You can also switch under System Settings > Network > More or Action > Locations. Your earlier settings remain available unless you changed them while that location was selected.
Expected result: Your Mac uses the settings saved in that location. Switching back doesn’t factory-reset your Mac.
Step 9: Remove a Location You No Longer Need
First, switch to a location you want to keep, such as Automatic. Then open Apple menu > System Settings > Network > More or Action > Locations > Edit Locations.
Select the unused location, such as Work, and click remove (–). Click Done. Remove a location only when you no longer need its saved settings.
Expected result: The removed name disappears from your available locations. The others remain.
Configuration: Choosing Settings That Make Sense
A simple setup is often enough:
| Location | When to use it | Example |
|---|---|---|
| Automatic | Your Mac connects correctly without separate settings | Keep using the default location |
| Home | You need a setting specific to your home setup | Prefer Wi-Fi before Ethernet |
| Work | Your workplace requires a different setup | Prefer Ethernet before Wi-Fi |
Home and Work don’t need different settings just because they have different names. Create separate locations when you have a setting to preserve. If both places work under Automatic, it’s easier to keep using it.
You can also try a different setup while keeping your earlier location available. Managing locations doesn’t delete network preference files, erase your Mac, or reset every network setting. If you’re trying to reset a connection, you’ll need separate instructions.
On macOS Monterey and Earlier
macOS Monterey and earlier versions use System Preferences instead of System Settings.
Open Apple menu > System Preferences > Network. In the Location menu, choose Edit Locations, click add (+), name the location, and select it.
Make your changes while that location is selected, then click Apply. To switch later, use the Location menu in Network and click Apply again when prompted.
If your Mac has System Settings, follow the macOS Ventura-or-later steps above.
Tips and Troubleshooting
Location Is Missing From the Apple Menu
Why it happens: The Apple menu shows Location when you have more than one network location.
Fix: Open System Settings > Network > More or Action > Locations > Edit Locations and create a second location. Then check Apple menu again.
You Cannot Find the Location Pop-Up Shown in Older Guides
Why it happens: On macOS Ventura and later, location controls are in the More or Action menu in Network settings.
Fix: Go to Apple menu > System Settings > Network, then open More or Action > Locations. On older macOS versions, use System Preferences > Network > Location.
The New Location Does Not Connect as Expected
Why it happens: A location gives you another set of network settings. Its name doesn’t supply the details a network requires.
Fix: Check that the intended location is selected. Then check Wi-Fi or Ethernet in Network settings. For work settings, use the values from your network administrator. You can return to your previous location while you sort this out.
The Mac Does Not Switch Locations When You Move
Why it happens: Home and Work are labels for saved settings. macOS doesn’t use them to detect where you are.
Fix: Choose a location from Apple menu > Location, or from System Settings > Network > More or Action > Locations.
You Want Your Earlier Settings Back
Why it happens: You’re using a different location.
Fix: Choose Automatic, or your earlier location’s name, from Apple menu > Location. If that menu is unavailable, use System Settings > Network > More or Action > Locations. As long as the earlier location still exists, its saved settings remain available.
Wrapping Up
You can keep Home and Work settings on one Mac and return to Automatic when you need your original setup. If your Mac connects everywhere without changes, stick with Automatic. Named locations are useful when you have a specific setting to change between places.