How to Connect to Another Mac Remotely: Screen Sharing, SSH, and Apple Remote Desktop

Ben Stockton
·
11 min read

Switching to Mac is reader-supported. We may earn a commission when you buy through links on our site. Learn more.

Need a file from the iMac at home while you’re at work? Or maybe a relative’s MacBook needs help and you can’t get there. Before you install a third-party remote desktop app, look at what’s already on your Mac. macOS has three built-in tools that do this well, and they cost nothing.

Here’s the short version. Use Screen Sharing to see and control the other Mac’s desktop. Use Remote Login (SSH) for Terminal access, scripts, and file transfers. Use Remote Management only with Apple Remote Desktop, when you’re looking after several Macs.

macOS System Settings > General > Sharing showing the Screen Sharing, Remote Management, and Remote Login toggles in the Advanced section, with Screen Sharing toggled on

Which Remote Access Option Should You Use?

OptionWhat you getBest forWorks over the internet?
Screen SharingFull view and control of the desktopHelping someone, using GUI apps remotelyRecommended: VPN or private network; other setups may require router or relay configuration (see security note below)
Remote Login (SSH)A command-line shellAdmin tasks, scripts, copying filesRecommended: VPN or private network; other setups may require router or relay configuration (see security note below)
Remote ManagementApple Remote Desktop control, reports, and file pushesManaging several MacsRecommended: VPN or private network; other setups may require router or relay configuration (see security note below)

Screen Sharing and Remote Management can’t be on at the same time. If Remote Management is enabled, turn it off before you turn on Screen Sharing (Apple’s Screen Sharing guide spells this out).

Before You Start

These steps are for current macOS releases that use System Settings. In October 2026, Apple’s macOS page lists macOS 27 Golden Gate as the latest release. Which version your Mac can run depends on its model, so update both Macs as far as they’ll go.

Then get the destination Mac (the one you’re connecting to) ready:

  1. Make sure it’s powered on and connected to your network. A wired connection with an Ethernet cable makes remote sessions noticeably steadier than Wi-Fi.
  2. If you want to reach it while nobody’s around, stop it from sleeping. Check System Settings > Lock Screen and, on Macs that have it, System Settings > Energy.
  3. Note its local hostname (something like office-mac.local) and IP address. Both appear in System Settings > General > Sharing.
  4. Know which user account you’ll sign in with. You’ll need that account’s password.
  5. Decide where you’ll connect from: the same home network, a VPN, or somewhere else on the internet. That last one needs extra setup, covered below.

Turn On Remote Access on the Destination Mac

All three services live in the same place.

  1. Open the Apple menu and choose System Settings.
macOS Apple menu open in the top-left of the menu bar with the System Settings item highlighted
  1. Go to General > Sharing.
macOS System Settings > General pane with the Sharing row highlighted

Each service below has an info button (the small “i”) next to its toggle. That’s where you control who’s allowed in.

Enable Screen Sharing

  1. In General > Sharing, make sure Remote Management is off.
  2. Turn on Screen Sharing.
macOS System Settings > General > Sharing with the Screen Sharing toggle switched on and Remote Management switched off
  1. Click the info button next to Screen Sharing.
  2. Under Allow access for, choose All users or Only these users. With Only these users, click the + button to add accounts and – to remove them.
macOS System Settings > General > Sharing > Screen Sharing info sheet with the Allow access for options visible, Only these users selected, and the plus button highlighted

I’d keep it to Only these users with your own account listed, unless several people really need in. Always verify the explicit allowed-user list in the Screen Sharing info panel — who gets access depends on how this is configured, not just account type. Fewer approved accounts means fewer ways in.

The same info sheet may offer extra options, such as letting others request permission to control the screen. Exact labels vary between macOS versions, so read them before you click Done.

Enable Remote Management (for Apple Remote Desktop)

Skip this section unless you’re using Apple Remote Desktop. For one or two personal Macs, Screen Sharing does the job with less fuss.

  1. In General > Sharing, make sure Screen Sharing is off.
  2. Turn on Remote Management, then click its info button.
  3. Choose All users or Only these users, and use + to add accounts.
macOS System Settings > General > Sharing > Remote Management info sheet with Only these users selected and the plus button highlighted
  1. Pick what remote administrators can do: observe, control, copy items, generate reports, and so on. Tick only what you need, then confirm.
macOS System Settings > General > Sharing > Remote Management options sheet showing checkboxes for Observe, Control, Show when being observed, Generate reports, Open and quit applications

Apple’s Remote Management guide covers each option. If you manage a company fleet, Apple also documents enabling Remote Management through MDM, which beats clicking through every Mac by hand.

Enable Remote Login (SSH)

  1. In General > Sharing, turn on Remote Login.
  2. Click its info button.
  3. Choose All users or Only these users, and use + to add the accounts allowed to log in.
macOS System Settings > General > Sharing > Remote Login info sheet with Only these users selected and the plus button highlighted

Remote Login can run alongside Screen Sharing, so you can have both. Apple’s sharing overview explains how the services relate.

Connect With Screen Sharing

This is where it gets pleasant. Apple’s Screen Sharing app is tucked away, but it actually works well once you find it.

Option 1: The Screen Sharing App

  1. Press Cmd + Space to open Spotlight, type Screen Sharing, and press Return.
macOS Spotlight search bar with "Screen Sharing" typed and the Screen Sharing app shown as the top hit
  1. Start a new connection and enter the destination Mac’s hostname (like office-mac.local) or IP address.
Screen Sharing app on macOS with the connection field open, a hostname like office-mac.local entered, and the Connect button highlighted
  1. Sign in with an account you approved earlier, then click Sign In or Connect (the button label depends on your macOS version).
Screen Sharing app on macOS showing the authentication dialog with Username and Password fields filled in and the sign-in button highlighted

The remote Mac’s desktop opens in its own window. You can use it as if you were sitting in front of it.

Screen Sharing app on macOS displaying a remote Mac's desktop in a window, with the toolbar showing control and scaling options

Option 2: Finder

  1. In Finder, choose Go > Network.
  2. Select the destination Mac if it appears, then click Share Screen.
  3. Sign in with an approved account.

Prefer typing? In Finder, choose Go > Connect to Server (Cmd + K) and enter vnc://office-mac.local or vnc://192.168.1.42. It’s a clever shortcut that skips browsing entirely.

Connect With Apple Remote Desktop

If you enabled Remote Management, you need Apple Remote Desktop, a paid app from the Mac App Store. Install it on the Mac you’ll be managing from.

  1. Open Apple Remote Desktop and finish its setup.
  2. Add client Macs by hostname or IP address, or find them with the app’s Scanner.
  3. Authenticate with an approved account on each client.
  4. Use your computer list to control screens, send files, run commands, or pull reports.

The client side is already installed in macOS, according to Apple’s setup guide. The Remote Desktop user guide covers lists, messaging, and the rest.

My honest take: it’s a capable tool built for IT admins. For a single home Mac, it’s more than you need.

Connect With SSH

SSH gives you a shell on the remote Mac. Open Terminal on your Mac and run:

ssh username@hostname

For example:

ssh [email protected]

An IP address works too:

ssh [email protected]

On your first connection, Terminal asks you to confirm the remote Mac’s host key. Type yes only if you recognize the machine, then enter that account’s password.

macOS Terminal window showing an ssh alex@office-mac.local command, the host authenticity prompt answered with yes, and a successful login prompt on the remote Mac

Type exit when you’re done.

Handy SSH Extras

Connect on a non-default port:

ssh -p 2222 username@hostname

Copy a file to the remote Mac:

scp ~/Documents/example.txt username@hostname:~/Documents/

If you connect often, set up SSH keys so you’re not typing passwords every time. First, generate a key pair on your local Mac if you don’t have one:

ssh-keygen -t ed25519

Then copy your public key to the remote Mac manually — this is the most reliable method and works on every Mac:

# Print your public key
cat ~/.ssh/id_ed25519.pub

Log in to the remote Mac with SSH (using your password), then run:

# On the remote Mac:
mkdir -p ~/.ssh
chmod 700 ~/.ssh
# Paste the output of cat ~/.ssh/id_ed25519.pub from your local Mac below:
echo "paste-your-public-key-here" >> ~/.ssh/authorized_keys
chmod 600 ~/.ssh/authorized_keys

If ssh-copy-id happens to be installed on your Mac (it’s not included in stock macOS), you can use it as a shortcut instead:

ssh-copy-id username@hostname

SSH won’t show you the desktop. If the job needs a graphical app, use Screen Sharing instead.

Connecting From Outside Your Home Network

Everything above works smoothly on the same local network. From a coffee shop or the office, your router sits in the way. It uses NAT and blocks most incoming connections, so a public IP address alone won’t get you in.

You could forward ports on your router, or use a relay service, but I’d strongly recommend against exposing SSH or VNC directly to the internet — it invites constant login attempts and brute-force attacks. Use a VPN or a private network service instead.

Tailscale is the easiest route I know of. It builds an encrypted private network between your devices using WireGuard.

  1. Install Tailscale on both Macs.
  2. Sign in to the same account (Tailscale calls this your tailnet).
  3. Connect using the Mac’s Tailscale IP address or its MagicDNS name, with Screen Sharing or SSH as usual.

No port forwarding, no router settings. It’s nicely done. ZeroTier works in a similar way, if you’d rather use that.

Third-Party Alternatives

Apple’s tools cover Mac-to-Mac well, but they’re not always the best fit.

  • Chrome Remote Desktop is free and works from Windows, Linux, ChromeOS, and iPad. That’s handy for helping a family member from whatever device you have nearby.
  • TeamViewer and AnyDesk handle unattended access and get through restrictive firewalls without a VPN. They need their own agents, macOS privacy permissions, and possibly an account or subscription.
  • MDM platforms are the right answer for a company fleet. Apple Remote Desktop is still useful for hands-on sessions, but it can’t replace proper fleet management.

Going the other way? You can also control Windows computers from your Mac with Windows Remote Desktop for Mac.

Troubleshooting

The Mac Doesn’t Appear in Finder

Check that both Macs are on the same network (or the same VPN), the destination Mac is awake, and Screen Sharing or Remote Management is on. Then skip discovery and connect directly with vnc://hostname.local or the IP address. If you’re on a mesh Wi-Fi system, make sure guest or client isolation isn’t separating the two Macs.

Screen Sharing Is Unavailable or Greyed Out

Usually Remote Management is on. Turn it off, then enable Screen Sharing. Also confirm your account is in the allowed list, and that no firewall or VPN policy is blocking the connection.

SSH Says “Permission Denied”

Double-check the username (it’s the short account name, the one in your home folder path) and the password for that remote account. Confirm Remote Login is on and your account is approved. If you use keys, check that ~/.ssh and authorized_keys have the right permissions.

Run this for detailed output:

ssh -v username@hostname

You can test basic reachability with ping hostname. A failed ping doesn’t prove SSH is down, though, because firewalls often block ping traffic.

Remote Login Works at Home but Not Over the Internet

That’s expected. Set up a VPN or Tailscale as described above.

Black Screen, or Stuck at the Login Window

If the remote Mac restarted and has FileVault on, it’s waiting for someone to unlock the disk. You can’t use it like a normal signed-in session until that happens. Behavior also varies depending on whether a user is already signed in.

The Connection Feels Slow

Screen Sharing sends screen changes over the network, so it’ll never feel quite local. Lower the remote display resolution, close bandwidth-heavy apps, and use a wired connection where you can. For anything that doesn’t need a GUI, SSH is far snappier.

macOS Asks for Screen Recording or Accessibility Permission

Third-party remote tools need permissions in System Settings > Privacy & Security, often Screen Recording, Accessibility, Input Monitoring, and sometimes Full Disk Access. Grant only what the app needs, and only to software you trust.

Can I Turn On Remote Access From Afar?

Not reliably. If no remote service was enabled on the Mac (and it’s not managed through MDM), someone has to set it up in person first. Configure it before you need it.

Does iCloud Give Me Remote Access?

Your Apple Account alone doesn’t create a path to another Mac’s desktop. You still need a local network, a VPN, Tailscale, or a third-party relay service.

Wrap-Up

For a feature most people never touch, Screen Sharing is a real gem. Pair it with Remote Login for Terminal work and Tailscale for access from anywhere, and you’ve got a remote setup that rivals paid tools. Bookmark this for the next time a relative calls with a “quick” Mac question. And if you’ve found a combination that works better for you, I’d love to hear what it is.